Acid cleaner for removing lime deposits and rust.
TK-40 is an acid descaling cleaner for removing lime deposits and rust. Designed to remove rust, lime deposits and organic contaminants from heating systems, flush heat exchangers, descale household appliances (washing machines, dishwashers, etc.).

ADVANTAGES:

• increases service life of heating systems
• increasing the efficiency of heat transfer surfaces by removing all complex and mineral deposits (scale, rust, etc.)
• does not affect the treated surface: does not destroy gaskets, seals, parts of assemblies, welds.
• acts on the whole complex of deposits: complex deposits dissolve, therefore there is no risk of clogging the system with clots of deposits.
• removal of deposits occurs without disassembling the equipment.
• the composition is made in the form of a concentrate and, when used, is diluted with water, which reduces the cost of cleaning

AREAS OF USE :

• industrial use - flushing of heat exchangers, removal of limescale and organic contamination from heating systems;
• consumer use - flushing of heating systems of housing and communal services, descaling in household appliances, various engine cooling systems, etc.

INSTRUCTIONS FOR USE :

1. For descaling: it is necessary to prepare a working solution - dilute 1 part of the composition (concentrate) in 9 parts of water (10%).
2. To remove rust: it is necessary to prepare a working solution - dilute 2 parts of the composition (concentrate) in 8 parts of water (20%).
3. The recommended flushing time is 1-4 hours, depending on the thickness of the dirt. After cleaning, rinse with plenty of water.
4. For household appliances: switch the washing machine to 50ºC without pre-washing. After filling with water, open the drawer and pour 500-1000 ml into the container. Concentrate. The machine should run the selected program including rinsing. For the dishwasher, select the 50ºC no rinse or Prewash program. Having collected water, open the hatch and pour 500-1000 ml into the container. Concentrate. The machine should run the selected program including rinsing. Repeat descaling if necessary.